What should I do if my exposure meter shows Error 10: Firmware Error, and does not work? View answer
How do you change between CINE, HD-C, and PHOTO Modes on the Sekoinc Flashmate L-308X-U? View answer
I want to confirm a firmware version set in the exposure meter itself. What should I do? View answer
What should I do if T (Shutter speed) priority mode cannot be set in ambient light mode? View answer
Regarding L-478 series or L-858D, can I change the language on the display? View answer
Can I control C-7000 via PC? Or can I control it with simple commands? View answer
The message, "E-6 error", is displayed. What should I do? View answer
Can I update the firmware at my end? View answer
Is it possible to utilize any rechargeable AA battery for the L-858D? View answer
There are only 3 stops of variable lens aperture range. How do I take photos with ± 3 EV? View answer
Why is there a difference between the luminance measured by the L-858 and that by the C-700 or C-800 or C-7000? View answer
(PocketWizard) The measured value on L-858D is not correct. View answer
(PocketWizard) PocketWizard cannot be triggered; what should I do? View answer
What Radio Transmitter Module is compatible with L-478D? View answer
What is the unit to adapt to a spectral distribution? View answer
Can the measurement be made in CQS? View answer
What parameters can be measured? View answer
Can I still use my meter if the objective lens is scratched? View answer
Can I capture the flash waveform graph into my PC? View answer
Message: "The set level does not exist in the image." Profile graph becomes 3 discrete zigzag lines. What is wrong? View answer
The measurements shift when the profile which I make is set. What should I do? View answer
What should I do if the DTS does not recognize my Spectro Meter? View answer
(broncolor) I'm using some flashes at the same time. I want to trigger each flash separately, but when I trigger by L-858D, all the flashes are fired. View answer
Can your color or spectro meters measure UV light? Can I measure the irradiance with Blue Daylight LED by Spectro-Meters? View answer
Can I have PAR readings in nm and PPFD readings in micromoles/m2/s? View answer
Which light system should be set for the metering of landscapes, Incident or reflected? View answer
My exposure meter shows "E.U.(Under Exposure)" in Cordless Flash Mode. What should I do? View answer
What are the modes PHOTO, CINE and HD CINE for? View answer
C800 screen damaged View answer
Sekonic C-800-U SPECTROMETER
Can I place Godox RX module to my old L358 and use as wireless triggering Godox X3.... View answer
Support
Is there a way to disable the auto power off on the L308X-U flash mate? View answer
regulation settings View answer
What can I get with USB connection and Utility software? View answer
How long is your warranty period for your products? What is your warranty policy? View answer
Can I use a wireless transmitter / receiver from another company? View answer
I cannot find any label on the built-in module - how can I distinguish if it is the RT-32CTL module? View answer
Do your meters have wireless compatibility with each flash manufacturer? View answer
(PocketWizard) The PocketWizard radio system includes two frequencies: FCC & IC (344MHz) and CE (433MHz). Does one exposure meter support both? View answer
(Phottix) The measured value on L-858D is not correct. View answer
(Godox/Flashpoint) The measured value on L-858D is not correct. View answer
(Elinchrom) The measured value on L-858D is not correct. View answer
How should I display flash light and ambient light reading on the analog scale at the same time? View answer
Can I measure an accumulation of repeated flash pops? View answer
(Elinchrom) I cannot control the modeling lamp of Elinchrom D-LITE RX4. View answer
(Elinchrom) Is your radio module RT-32CTL compatible with Elinchrom Flash? View answer
Who should I ask for checkup and calibration? View answer
Can I get any different F-stop values when I change any shutter speed in Flash Light Mode? View answer
Can I display the brightness with Lux or Foot-candle? Can I obtain flash-light integration via flashing time? View answer
Ask a question and receive knowledgeable answers from topic experts
